Control Voltage
Timeline Control
Zoom F T
Sec
Paste at Sec
Pitch Sec
Paste Till Sec
Voltage
5V
4V
3V
2V
1V
0V
0.0s
0.0V
Time (Seconds)
When CVs are added will display here with Title, close icon, Sec and Voltage reading.
Quick Start Guide
🎛️ Control Voltage & Dropdown 
1
Click Control Voltage dropdown button on the
control voltage strip ( below menu bar ) to access
CV graph to add trigger point or curve.
control voltage strip ( below menu bar ) to access
CV graph to add trigger point or curve.
➕ Adding Modules 
2
Click on the SELECT MODULE dropdown to select the modules
from the categories then click ADD MODULEbutton.
from the categories then click ADD MODULEbutton.
🔌 Module Patching 
3
Connect modules using their unique IDs:
• Right-click a module's ID in the header to copy it
• Paste the ID into input fields of other modules
• Watch connection LEDs turn ● green when connected
• Right-click a module's ID in the header to copy it
• Paste the ID into input fields of other modules
• Watch connection LEDs turn ● green when connected
4
Basic signal chain: VCO → VCA → MASTER OUT
Add effects: VCO → FLTR → ECHO → MASTER OUT
Add effects: VCO → FLTR → ECHO → MASTER OUT
Saving Project
💾 Save & Load 
1
Click SAVE button to store your project locally.
Projects are saved as JSON files in your local storage.
Projects are saved as JSON files in your local storage.
2
Use LOAD button to open a previously saved project.
All module connections and settings will be restored exactly.
All module connections and settings will be restored exactly.
� Auto-Save 
3
Watch the ● green LED next to SAVE button.
It blinks when auto-save is active, protecting your work automatically.
It blinks when auto-save is active, protecting your work automatically.
�️ Project Management
4
RESET clears all modules and starts fresh.
Current project name is shown in the PROJECT FILE section.
Current project name is shown in the PROJECT FILE section.
Recording Guide
🎙️ One-Click Recording 
1
Click RECORD button to start capturing audio.
The ● red LED indicates active recording.
The ● red LED indicates active recording.
2
Audio is recorded in lossless WAV format.
Bit rate: 1411 kbps • Channels: Stereo (L/R)
Bit rate: 1411 kbps • Channels: Stereo (L/R)
� Audio Processing 
3
Monitor levels with PEAK and RMS meters.
Watch GR meter for gain reduction and clip counter.
Watch GR meter for gain reduction and clip counter.
� Master Processing
4
Enable DC FILTER to remove DC offset.
Adjust LIMITER threshold to prevent clipping.
Adjust LIMITER threshold to prevent clipping.
For the best view of the synth UI, use a 1920px display;
and for optimal clarity and depth, please connect
a high-quality external audio system.
and for optimal clarity and depth, please connect
a high-quality external audio system.
Note: This creative side music-production project is currently underway. We’re fixing errors, upgrading features, and testing new improvements. Any feedback or suggestions are welcome! Reach us at: connect@synthdrift.com